A curved backyard pool isn’t the easiest place to add swimming equipment. Irregular walls, rounded coping, and limited straight-line space usually make conventional counter-current systems difficult to install without major remodeling. For homeowners who want to swim in place without rebuilding their pool, a portable swim jet offers a compelling alternative.
In a multi-week backyard video test, reviewers Doug and Niki put the iGarden Swim Jet X PRO 10 (X35-P60) through its paces in their screened-in, freeform pool. With a curved pool edge, a nearby rock waterfall, and no dedicated lap lane, their setup served as a practical real-world test of how well a portable jet handles both steady swim training and recreational water play.
First Impressions: Zero Construction and a 5-Minute Setup
The iGarden Swim Jet X PRO 10 (X35-P60) arrives pre-assembled in two main components: an underwater propulsion unit and a separate battery-powered control box.
The suitcase-style propulsion unit features a white-and-silver housing, a directional front louver grille, and a protective rear intake plate. Built-in bottom wheels and a top handle make it easy to roll across the pool deck and lift into the water with one hand. Two telescoping rails extend to a padded saddle that rests over the pool coping, while rubber bumpers brace against the underwater wall.
Instead of requiring permanent plumbing or heavy counterweights, the unit uses half-turn locking pins to adjust the mounting depth in seconds. Once the required safety tether is secured to a fixed anchor point and the heavy-duty cable is connected to the battery box, the system is ready to run—taking under five minutes from unboxing to swimming.
How Well Does It Fit a Curved Pool?
A common concern with portable swim jets is stability on rounded or freeform walls, where rigid brackets often fail to sit flush. In Doug and Niki’s curved pool, the iGarden Swim Jet X PRO 10 (X35-P60)’s padded rim support and rubber wall stoppers gripped the rounded coping securely without drilling or extra ballast weights, even at higher thrust levels.
Of course, every freeform pool has unique dimensions. Coping thickness, wall angles, submerged steps, and available clear water in front of the outlet all affect compatibility, so homeowners should verify that their pool edge provides a stable resting point and unobstructed swim space before purchasing.
Swimming Against the Current: Adjusting Depth Changes Everything
Powered by a Permanent Magnet Synchronous Motor (PMSM) and AI inverter speed control, the iGarden Swim Jet X PRO 10 (X35-P60) delivers up to 1,100 gallons per minute (250 m³/h) of water flow. One of the standout takeaways from the backyard test is how dramatically the water feel changes depending on mounting height:
- Lower Position for Lap Swimming: Submerging the outlet roughly 2–4 inches (5–10 cm) below the surface produces a smooth, concentrated laminar current. For Doug—a casual backyard swimmer looking to avoid constant flip-turns—a 20-minute session against the steady flow provided a demanding, low-impact cardio workout. At the top rapid setting (nicknamed “Michael Phelps” mode in the video), the current is strong enough to challenge experienced swimmers and triathletes.
- Higher Position for Water Play: Sliding the unit closer to the waterline breaks the flow into lively surface turbulence. While it won’t turn an entire large pool into a theme-park lazy river, it creates an energetic current zone ideal for floating and family recreation.
Noise, Safety, and Battery Endurance
High-powered pool equipment can easily disrupt a quiet backyard, so operating acoustics are a key factor. When Doug switched the iGarden Swim Jet X PRO 10 (X35-P60) on at P1 with the family’s dog sitting just inches away from the control box on the deck, the dog didn’t even flinch—demonstrating how quietly the submerged PMSM motor runs compared to traditional surface pumps.
Safety and battery engineering are equally well suited for poolside operation:
| Feature | Real-World Experience & Specs |
| Max Outlet Flow | Up to 1,100 GPM (250 m³/h) across 5 steady speeds + 2 randomized HIIT modes |
| Battery Runtime | 1.5 to 10 hours per charge (depending on flow intensity; easily covers a week of 20-minute daily swims) |
| Charging Time | ~7 hours from 0% to 100% (convenient overnight charge) |
| Waterproof Ratings | IP68 for the underwater jet unit; IP65 splash-proof for the poolside battery box |
| Safety Protections | Recessed impeller behind a narrow grille, auto-shutoff displacement/movement sensor, low-voltage power, and emergency stop button |
One Minor Caveat: Once connected, the iGarden smartphone app makes it convenient to switch flow levels, run randomized HIIT intervals, and set timers. However, Doug and Niki noted that initial app pairing took a bit of patience. Fortunately, physical buttons on top of the battery box control power, speed, and timers directly, so users never need a phone poolside for everyday swims.
Final Verdict
While the iGarden Swim Jet X Series is not a direct substitute for a full-length Olympic lap pool—and buyers should always confirm coping fit and a fixed anchor point for the safety tether—Doug and Niki’s test shows just how much versatility a portable jet can unlock in an existing backyard pool. For homeowners seeking consistent, zero-impact swim workouts and adjustable family water fun without a $30,000 renovation, it hits a compelling balance of power, portability, and simplicity.